Tile & Grout Articles
What Is Furan Grout and Where Is It Used?
Furan grout is a water-free, chemical-resistant resin grout used mainly in industrial tile and brick installations. It handles conditions that can damage ordinary cement grout, including chemical exposure and high temperatures. We consider chemical compatibility the...
Why Floor Tiles Move Underfoot Without Cracking
Floor tiles can move without cracking when the adhesive bond fails or the supporting floor flexes. The tile may remain intact because the bond gives way first, while grout around its edges starts to loosen. We recommend investigating floor tiles moving under normal...
Why Tile Floors Sound Hollow When Tapped
A hollow sounding tile usually has an air gap beneath it because thinset mortar or adhesive didn't make full contact. However, sound alone doesn't prove failure, since some correctly installed floor assemblies also sound hollow. We recommend checking for tile...
Why Grout Smells Musty After a Shower
A musty smell after showering usually means moisture is supporting mold, mildew, or bacteria in trapped soap residue and dirt. Porous grout can hold that buildup, but drains, wet fabrics, and hidden leaks can create similar stale conditions. We recommend finding the...
Why Grout Turns Dark When Wet and Dries Lighter
Water absorbed by cement-based grout makes it look darker when wet. As the water evaporates, the grout returns to its usual lighter color. This change is usually normal. Grout that stays dark, dries unevenly, or develops recurring patches needs closer attention before...
Why Grout Pinholes Form After Installation
Excess mixing water can evaporate or trapped air can escape, leaving small voids in a joint. A few shallow holes in firm grout are usually surface defects, but deep holes, crumbling grout, or signs of leakage need attention. Repair defects in wet areas rather than...
How to Identify Cement Grout in an Existing Tile Floor
You can't confirm cement grout by color alone. Cement, epoxy grout, and coated grout can look similar after years of cleaning and foot traffic. We recommend checking installation records first, then using cautious, non-destructive observations like surface texture and...
Grout vs. Caulk in Shower Corners: What to Use
A crack in your shower corner needs a different repair than damaged grout between tiles. When weighing grout vs caulk shower corners, start with joint location, then check the shower system's installation instructions. For a standard tiled shower, we recommend...
How to Clean Epoxy Grout Without Dulling Tile
A clean grout line won't help much if the tile beside it turns cloudy. When you clean epoxy grout, start by removing grit, then choose a cleaner that suits both surfaces. Epoxy tile grout resists stains better than cement-based grout, but grease, soap residue, and...
Sanded vs Unsanded Grout for Bathroom Tile
The wrong grout can leave a bathroom floor with weak tile joints or a shower wall with hard-to-fill gaps. The choice between sanded and unsanded grout comes down to joint width first, then tile material, surface location, and the product instructions. Don't choose by...
Grout Efflorescence Removal Without Damaging Tile
White residue on new grout can look like a cleaning failure. Often, moisture carries mineral salts to the surface. Removing the deposit works best when you identify it first. Use the mildest method that fits the tile, grout, and amount of buildup. Stronger chemicals...
How to Clean Textured Tile and Grout Without Damage
Textured tile floors trap soil in raised areas and recessed spots. Smooth surfaces are easier for a mop to pass over than tile floors with deep texture. Grime can still settle in the low spots and grout lines. To clean textured tile properly, remove dry debris first,...
How to Remove Grease From Kitchen Floor Grout
A greasy kitchen floor can look clean after mopping, but cooking grease can leave kitchen tiles tacky again by dinner as grease buildup resurfaces. To remove grease from grout, break up the oil before you scrub the joint. Mopping lifts loose soil, but cooking oil...
How to Remove Rust From Grout Safely
Orange-brown marks around a shower can look permanent, but the wrong cleaner may worsen the damage. Identify the source, test the surface, and choose compatible cleaning solutions instead of the strongest available cleaner. Rust often comes from iron in water, metal...
How to Remove Grout Haze From Porcelain Tile Safely
If you're searching for “remove grout haze porcelain tile,” start with the least aggressive method. Daylight may reveal a cloudy film on the newly installed surface. This film usually comes from leftover cement, water, and minerals from installation. Begin with dry...
Bleach Damaged Grout: What to Do Next
Bleach can make dirty grout look clean in minutes, then leave a weaker surface behind. If you are dealing with bleach damaged grout, the white color may hide pitting, lost sealer, and increased moisture absorption. Repeated exposure to bleach on grout can worsen these...
Vinegar Tile Grout: When It Is Safe to Use
Vinegar tile grout cleaning can remove light surface grime, but it isn't safe for every floor. The acid in white vinegar may weaken unsealed cement-based grout, damage some sealants, and etch natural stone tile. Check the grout and tile type before using any cleaning...
Pink Mold in Shower: Why Grout Turns Pink and How to Clean It
Pink grout is usually a sign of a wet, residue-covered surface, not a failed tile. If you have searched for pink mold in shower areas, you are probably seeing a slimy pink or reddish-orange film along grout lines, caulk, or a drain. Most cases are linked to pink...
How to Remove Hard Water Stains From Shower Grout
Hard water leaves more than spots on glass. It can leave a chalky, yellow, or orange film in the porous grout lines of a shower. If you need to remove hard water stains grout has collected, don't start with the strongest acid. Identify the deposit first, then use the...
What Causes Cracked Grout Between Floor Tiles?
Cracked grout between floor tiles usually points to subfloor movement, not a cleaning problem. The grout may be the first visible failure, but the tile, thinset, backerboard, subfloor, or joists can be moving underneath it. New grout can crack within days when it was...